Dynamic hydrocyclone calcined furnace is developed in 1997 to successful domestic the first used in powder material of dynamic calcining equipment, and obtained the patent
Product introduction
Burning is modified, purification and decomposition, oxidation, reduction chemical process, sintering process of material is static and dynamic movement, the larger the surface area than when calcination materials, heat transfer speed faster, the shorter the burning time. Dynamic hydrocyclone is will powder material calcined with heating hot air flow to form after mixing at maximum surface heat than to instant calcination, is to ensure that sufficient heat transfer, decomposition, improve the quality of the product of the new process equipment.
Working principle
Burning furnace mainly by the gas heater, air and solid mixer, calcining furnace, gas-solid separation of collector. The material is calcined gas-solid mixer to send in charging, with gas heater heating hot air is mixed spin flow pattern movement, sintering process in the moment, after the completion of calcined furnace from export into the air and solid separator, after the separation solids and gases separately from discharging mouth and vents eduction.
Performance characteristics
Continuous operation, temperature controlled, gas-solid mixing fully, the product quality is stable.
Instant calcination, product without burning, be helpful for active products production.
Closed system, environment pollution, high efficiency, civilized production.
The exhaust gas combustion can be equipped with cooler, dryer for system combination, and effective use of heat energy.
Configuration exhaust recycling system, tail gas treatment and utilization
Stoves calcining stoves internal air temperature of 500-1600 ℃
Burning material particle size < 60 mesh.
Burning fuel, solid (coal), gas (gas, natural gas), liquid (diesel oil, heavy oil).
Combustion way: indirect and direct, internal and external ignition.
Powder granular material decomposition
Burning and drying system combination configuration
For effective use of tail gas to save energy, in calcination exhaust part add dry device, but for the burning material preheating and dehydration make emissions temperature drop, the effective utilization of energy.
。
Calcined furnace industrial application
Widely used in chemical industry, building materials, mining, etc, and the typical example for things
chemical
Zinc, iron, magnesium oxide, lithium, nickel, cobalt, aluminum hydroxides, and rare earth oxides, barite, BingJingShi, vanadium pentoxide, manganese sulfate, soda ash, etc
Building materials mining
PengMei ore, half water gesso, kaolin, water magnesium, calcium carbonate, stone molybdenum trioxide thulium, powder, magnesite, etc
• I company can provide different specifications type furnace, design and manufacture and installation, for special burning process can be furnace type accessory design.
• provide industrial furnace type test device, meet the different material test requirements.
Technical specifications
Explanation:
1 according to the material properties, production,, size distribution, specific gravity, specific heat, calcining temperature and so on the different, choose different models and supporting system.
2, the table data in the furnace temperature 850 ℃ when given, temperature changes, but the corresponding conversion.
Enterprise application cases:
1, shanxi JiShan zinc oxide burning system
2, gansu jinchuan nickel titanium acid calcined system
3, ChengGang more acid calcined system vanadium ammonium dozens of enterprise applications